In part one of our review of the Gigabyte Z87-UD3H we looked at the design, features and layout of the board. Now in part two we are going to see if those choices were good or bad. Gigabyte has a fairly good history of designing boards that have great performance, but as have also seen boards that fall apart as soon as you push them (overclocking). So far it looks like the Z87X-UD3H has the right components and design to maintain performance for both stock use and also for overclocking. Let’s put that theory to the test shall we?
BIOS -BIOS is an acronym that stands for Basic Input/Output System. It is meant to control your product at a very low level. As of right now there are three regularly used BIOS formats (there are actually more than that but there are three common ones). These are the AMI (American Megatrends Incorporated), Award, and Phoenix. Of course with the introduction of the UEFI (Unified Extensible Firmware Interface) we now have a solid basis for the “BIOS” on new motherboards. This actually gets away from the term BIOS (Basic Input/Output System) and becomes more of a software interface. Each manufacturer will have their own take on how to implement this; some good, some not so good.
Gigabyte has moved away from the “3D” Bios layout that they were employing when the UEFI standard came out. This is a good thing as the older layout (and implementation) was sluggish and buggy. The new layout is much cleaner and offers improved performance and many options for customization. Check out our video below for more information.
