As you might imagine we have a rather large number of electronic devices in use in our lab. These range from network switches to access points to tablets and more. Although we did build in surge protection and a good number of isolated outlets into the lab we always like to have more protection and more available plugs to play with. After wading through a number of flat and boring power strips with basic surge protection we started looking for something different. That is when we stumbled across a company called Accell and their PowerSquid Surge Protector.
The Box and Goodies -
As you might imagine the PowerSquid did not come in an actual box. Instead it comes in a plastic clamshell style casing that leaves the plug ends dangling down (which helps give the product its name).
On the front of the packaging Accell has put the rating for the surge protection side in large friendly letters. You get a respectable 1080 Joules [http://en.wikipedia.org/wiki/Joule] of protection in the event of a high-level surge the device will die instead of your hardware. 
On top of the basic surge protection you also are getting a nice feature that is almost unheard of in power strips or even surge protectors, Accell has built in line conditioning into the PowerSquid. Accell also warrants (limited warranty) up to $100,000 of your hardware in the event of a surge. 
There is really not that much more to the packaging, but then again you would not buy this product for the box it comes in.
