MAINGEAR's EPIC T1000 Phase Change Thermal Interface Material Cools off the Lab - Peformance

ETIOnly a few weeks after we showed you the performance of the MAINGEAR Epic180 we have another product from MAINGEAR in the labs. This is their DIY thermal interface material called the MAINGEAR EPIC T1000 (yes it is a terminator reference). The EPIC T1000 is a phase change alloy that changes from a solid to a liquid when exposed to heat. This creates and flow that is capable of filling in any and all pores and lines in both the CPU heat spreader and the head of your cooler (whether it is water cooling, air or other). This, technically can beat even the smoothest thermal paste on the market in terms of fill and also should be able to outperform them in terms of thermal transfer as the head of your cooler and the CPU are almost soldered together for an even and continuous surface contact. So let’s take a look at what you get with this new DIY kit from MAINGEAR and also see if it really can improve performance.

Performance -
Our system specs are show here:
systemidleidle-oc
Our in lab tests are listed below;
3DMark 11 -
3DMark 11 is the other Futuremark test that we run on our motherboards. This test simulates the typical tasks that a GPU (and system) would have to perform to provide you with a good gaming experience. It is based on the DX9, DX10 and DX11 engines but can only be installed on Windows Vista or later. The suite of tests covers DX9, DX10, and of course DX11 rendering; it also covers AI computations and physics. That’s right I said Physics the latest version of 3DMark uses a Havok physics engine. This removes the advantage that nVidia had with 3DMark Vantage.
3dm
As you can clearly see we averaged about a 4c reduction in temperature using the exact same settings. This is impressive for a thermal compound to make this much of a difference.
3dm-oc
HyperPi 0.99b -
HyperPi is a front end application that allows you to easily run multiple instances of the SuperPi application. SuperPi, for those that are not familiar with it, is an application that measures the time it takes to calculate the number Pi out to as many as 32 million places. This calculation is then checked and run multiple times (up to 24 for a 32M run).  This test stresses the CPU, Memory and HDD as data is handed off between the three. If there is a weak link, HyperPi will show it. For our testing we run the 32M test on as many cores (and threads) as the CPU has available.  The slowest CPU time is then recorded.
hpi
Once again we are seeing similar results in our HyperPi runs. Here we actually expected to see a smaller difference but the EPIC T1000 was up to the load.
hpi-oc
Lightwave 3D 9.6 x64 -

Lightwave is another industry standard application for 3D animation and rendering. It has a large tool base and the rendering engine is highly threaded (when using the right render model). This application is also capable of expanding to 4k resolutions as well as ray tracing for rending the light sources. For our testing we use frame 470 of the Pinball scene found in the LW 9 Content folder.  This uses the newer perspective camera that is better suited to a multi-CPU/Core environment. This camera style also uses ray tracing and a much improved anti-aliasing method. Settings are shown below in the attached screen shot.  
lw
Again, all we can really say here is wow… to reduce the temperatures by 4c almost across the board is something that we just did not expect.

lw-oc

No comments

Leave your comment

In reply to Some User